MECH01 Packing

MECH 01 PACKING

ITEM ITEM NO. MECH CODE DIMENSION
PACKING MECH01 MECH01-040/3 40 x 56 x 22.5
PACKING MECH01 MECH01-008 8 x 18 x 18.5
PACKING MECH01 MECH01-010 10 x 20 x 18.5
PACKING MECH01 MECH01-012 12 x 22 x 18.5
PACKING MECH01 MECH01-013 13.5 x 25 x 16.5
PACKING MECH01 MECH01-014 14 x 24 x 18.5
PACKING MECH01 MECH01-015 15 x 25 x 18.5
PACKING MECH01 MECH01-015/1 15 x 32 x 25
PACKING MECH01 MECH01-016 16 x 26 x 18.5
PACKING MECH01 MECH01-018 18 x 28 x 18.5
PACKING MECH01 MECH01-020 20 x 30 x 18.5
PACKING MECH01 MECH01-020/1 20 x 32 x 22.5
PACKING MECH01 MECH01-022 22 x 32 x 18.5
PACKING MECH01 MECH01-022/1 22 x 34 x 22.5
PACKING MECH01 MECH01-025 25 x 37 x 22.5
PACKING MECH01 MECH01-025/1 25 x 40 x 22.5
PACKING MECH01 MECH01-028 28 x 40 x 22.5
PACKING MECH01 MECH01-028/1 28 x 43 x 22.5
PACKING MECH01 MECH01-030 30 x 42 x 22.5
PACKING MECH01 MECH01-030/1 30 x 45 x 22.5
PACKING MECH01 MECH01-032 32 x 44 x 22.5
PACKING MECH01 MECH01-032/1 32 x 47 x 22.5
PACKING MECH01 MECH01-035 35 x 47 x 22.5
PACKING MECH01 MECH01-035/1 35 x 50 x 22.5
PACKING MECH01 MECH01-036 36 x 48 x 22.5
PACKING MECH01 MECH01-036/1 36 x 51 x 22.5
PACKING MECH01 MECH01-040 40 x 52 x 22.5
PACKING MECH01 MECH01-040/1 40 x 55 x 22.5
PACKING MECH01 MECH01-040/2            40 x 55 x 25
PACKING MECH01 MECH01-042 42 x 54 x 22.5
PACKING MECH01 MECH01-042/1 42 x 57 x 22.5
PACKING MECH01 MECH01-045 45 x 60 x 22.5
PACKING MECH01 MECH01-045/1 45 x 65 x 22.5
PACKING MECH01 MECH01-047 47 x 65 x 33
PACKING MECH01 MECH01-048 48 x 63 x 22.5
PACKING MECH01 MECH01-050 50 x 65 x 22.5
PACKING MECH01 MECH01-050/1 50 x 70 x 30
PACKING MECH01 MECH01-055 55 x 70 x 22.5
PACKING MECH01 MECH01-055/1 55 x 75 x 30
PACKING MECH01 MECH01-055/2 55 x 67 x 24
PACKING MECH01 MECH01-056 56 x 71 x 22.5
PACKING MECH01 MECH01-056/1 56 x 76 x 37
PACKING MECH01 MECH01-060 60 x 75 x 22.5
PACKING MECH01 MECH01-060/1 60 x 80 x 37
PACKING MECH01 MECH01-060/3 60 x 85 x 37
PACKING MECH01 MECH01-063 63 x 78 x 22.5
PACKING MECH01 MECH01-063/1 63 x 83 x 37
PACKING MECH01 MECH01-063/2 63,5 x 78 x 40
PACKING MECH01 MECH01-065 65 x 80 x 22.5
PACKING MECH01 MECH01-065/1 65 x 85 x 40
PACKING MECH01 MECH01-070 70 x 85 x 22.5
PACKING MECH01 MECH01-070/1 70 x 90 x 40
PACKING MECH01 MECH01-075 75 x 90 x 22.5
PACKING MECH01 MECH01-075/1 75 x 95 x 40
PACKING MECH01 MECH01-075/2 75 x 87 x 25
PACKING MECH01 MECH01-075/3 75 x 100 x 34
PACKING MECH01 MECH01-080 80 x 95 x 22.5
PACKING MECH01 MECH01-080/1 80 x 100 x 40
PACKING MECH01 MECH01-085 85 x 100 x 22.5
PACKING MECH01 MECH01-085/1 85 x 105 x 40
PACKING MECH01 MECH01-090 90 x 105 x 22.5
PACKING MECH01 MECH01-090/1 90 x 110 x 40
PACKING MECH01 MECH01-090/2 90 x 110 x 26
PACKING MECH01 MECH01-095 95 x 120 x 50
PACKING MECH01 MECH01-100 100 x 115 x 30
PACKING MECH01 MECH01-100/1 100 x 120 x 40
PACKING MECH01 MECH01-105 105 x 120 x 30
PACKING MECH01 MECH01-110 110 x 125 x 30
PACKING MECH01 MECH01-110/1 110 x 130 x 40
PACKING MECH01 MECH01-115 115 x 130 x 30
PACKING MECH01 MECH01-115/1 115 x 140 x 46
PACKING MECH01 MECH01-115/2 115 x 135 x 30
PACKING MECH01 MECH01-120 120 x 140 x 49
PACKING MECH01 MECH01-120/1 120 x 145 x 46
PACKING MECH01 MECH01-125 125 x 140 x 34
PACKING MECH01 MECH01-125/1 125 x 150 x 46
PACKING MECH01 MECH01-130 130 x 155 x 42.5
PACKING MECH01 MECH01-135 135 x 160 x 55
PACKING MECH01 MECH01-140 140 x 155 x 34
PACKING MECH01 MECH01-140/1 140 x 165 x 46
PACKING MECH01 MECH01-150 150 x 170 x 40
PACKING MECH01 MECH01-150/1 150 x 180 x 60
PACKING MECH01 MECH01-160 160 x 180 x 40
PACKING MECH01 MECH01-160/1 160 x 190 x 60
PACKING MECH01 MECH01-165 165 x 195 x 50.5
PACKING MECH01 MECH01-180 180 x 200 x 40
PACKING MECH01 MECH01-180/1 180 x 210 x 60
PACKING MECH01 MECH01-190 190 x 220 x 42
PACKING MECH01 MECH01-200 200 x 220 x 40
PACKING MECH01 MECH01-200/1 200 x 230 x 60
PACKING MECH01 MECH01-210 210 x 240 x 50
PACKING MECH01 MECH01-240 240 x 270 x 60
PACKING MECH01 MECH01-250 250 x 270 x 42
PACKING MECH01 MECH01-260 260 x 290 x 60
PACKING MECH01 MECH01-290 290 x 320 x 35
PACKING MECH01 MECH01-300 300 x 330 x 60
PACKING MECH01 MECH01-310 310 x 340 x 60
PACKING MECH01 MECH01-320 320 x 350 x 60
PACKING MECH01 MECH01-320/1 320 x 360 x 46
PACKING MECH01 MECH01-330 330 x 360 x 60
PACKING MECH01 MECH01-360 360 x 390 x 60
PACKING MECH01 MECH01-400 400 x 440 x 65
PACKING MECH01 MECH01-400/1 400 x 430 x 46
PACKING MECH01 MECH01-420 420 x 460 x 80
PACKING MECH01 MECH01-440 440 x 480 x 68
PACKING MECH01 MECH01-450 450 x 490 x 65

PACKING

Made of cotton fabric impregnated with NBR (nitrile) , MECH01 and MECH04 series consist of 7 base components;  one back up ring (rubber reinforced with hard fabric), one header ring with POM or fabric, three middle V-rings with NBR. MECH01 is used for rod applications. Made of fabric impregnated with FKM (viton), our packings for special conditions (high temperature, special  liquid, chemicals) are produced in the contents of special order. Our packings prepared in this way consist  all of their components viton with fabric. For the packing applications, it is required to use the design of rod in parts or piston. It is recommended that a suitable grease or lubricant must be used during assemblage. It is important for the working life of packings that the measure, B, in the packings housing should be  adjustable with a proportion of 5% of given measure, B in our catolog it is obvious that over squeezing  packings V-rings during fitting will result in problems such as high friction forces, over heating and vibrated  working in low pessure. If there is the requirement of using closed type seal housing, packings can be  used by cutting their V-rings with a slope 45° and adjusting these cutted rings in the way of setting them with an angle of 75° in between. This way of solution is the case when most required.

“For needs out of standard dimensions, please apply our costumer service.”

Member Testimonials

ONGC – Oil and Natural Gas Corporation Limited

"ONGC - Oil and Natural Gas Corporation Limited" - Our complex drilling application where Shaft was eccentric and application was robust & muddy. Replacement was never easy. Mech Spares designed Oil seals resolved difficulty. This gave a complete joy to my maintenance team.
2014-06-08T07:48:57+00:00
“ONGC – Oil and Natural Gas Corporation Limited” – Our complex drilling application where Shaft was eccentric and application was robust & muddy. Replacement was never easy. Mech Spares designed Oil seals resolved difficulty. This gave a complete joy to my maintenance team.

Kuwait National Petroleum Company

"Mr Mohammed Al Duaigy" of (Kuwait National Petroleum Company) : We tried several diaphragms from renown worldwide Rubber manufacturing companies. We found Mech Spares technical know how and product to be of great durability and lasted 3 times more then anticipated. They have accurate understanding of there products.
2014-06-08T07:49:23+00:00
“Mr Mohammed Al Duaigy” of (Kuwait National Petroleum Company) : We tried several diaphragms from renown worldwide Rubber manufacturing companies. We found Mech Spares technical know how and product to be of great durability and lasted 3 times more then anticipated. They have accurate understanding of there products.

McCafferty BM Design Ltd, KENT United Kingdom

"McCafferty BM Design Ltd, KENT United Kingdom" - Most of the O rings manufacturing company suggested to use larger diameter and expensive elastomers. We learnt with Mech Spares that elastomer being weaker compare to metal and alloys and needs appropriate back up for high pressure or high vacuum applications. Further not necessary the most expensive elastomer is the best for all applications. We trust Mr Nilesh chodhari completely for all our O rings designing applications.
2014-06-08T07:50:26+00:00
“McCafferty BM Design Ltd, KENT United Kingdom” – Most of the O rings manufacturing company suggested to use larger diameter and expensive elastomers. We learnt with Mech Spares that elastomer being weaker compare to metal and alloys and needs appropriate back up for high pressure or high vacuum applications. Further not necessary the most expensive View Full →

Bhabha Atomic Research Centre ( BARC )

"Dr. A. Singh" of BARC: The electric Insulation mat manufactured by MECH SPARES as per IS 15624 tested at ERTL and found to withstand 40 Kv and still didn't tear. We have been using since 5 years and still didn't generate any fatigue. They arranged bulk delivery in short period.
2014-06-08T07:16:20+00:00
“Dr. A. Singh” of BARC: The electric Insulation mat manufactured by MECH SPARES as per IS 15624 tested at ERTL and found to withstand 40 Kv and still didn’t tear. We have been using since 5 years and still didn’t generate any fatigue. They arranged bulk delivery in short period.

Tata Steel

"Tata Steel" - One of our old machines started making loud noise and disturbed the entire village. We were compelled to stop the machines which lead to huge production loss. With the help of Mech Spares designed bellows in two part we could retain the lubrication and eliminate the noise.
2014-06-08T07:17:16+00:00
“Tata Steel” – One of our old machines started making loud noise and disturbed the entire village. We were compelled to stop the machines which lead to huge production loss. With the help of Mech Spares designed bellows in two part we could retain the lubrication and eliminate the noise.
View O Ring Reference Chart