Electrical & Insulation Mat
Rubber is a known as Natural Dielectric insulator by inherent nature. Rubber mixed with right components becomes heavy duty Matting to places on Floors around Control Panels, Switch boards, Transformers and other high voltage workplaces which are prone to electric Current.The basic principle behind designing of Electrical Insulating mats also called dielectric carpets simply to protect ofHumans & electronic utilities on electrical Installations.
SPECIFICATION FOR MECH INSULATING MATS AS PER IS 15652:2006
Max. Use Voltage
AC Proof Voltage
Visual : Diamond Profile on Top and other side Cloth Impression
Dimensions : Standard Length 2.0 Mtr. – Mats in rolls of 10/20/30mtrs. and more also available on request.
Standard Width : 1.0 Mtr. – Width up to 1500mm also available on request.
Standard Thickness : 2.0mm, 2.5mm, 3.0mm. Higher thickness conforming to IS 15652 also available.
Shapes : Form Rolls, Square Tiles, Mats
Working Temperature : 10°C to 55°C
Colors : Black, Red Blue Grey
Tolerance on Thickness +/- 10%
Tensile Strength Min. 17N/mm2
Elongation at Break (Min.) 300%
Heat Ageing Tensile & Elongation not less than 75% of org. value.
Flame Retardance V-0, V-1 (about 5 Seconds)
Leakage Current Not more than 10mA
Acid/Alkali Resistance Very Good
Insulation Resistance Min. 100000 Mega Ohms
Extreme Low Temperature Resistant upto -40°C.
Expected Life 5-10 years. DIN 9760
INSULATING RUBBER MATTING
The following division is based on threshold level of electric current resistance.
Width 0.9mtr, 1.0mtr, 1.2mtr, 1.5mtr.
Length 2mtr, 5mtr, 10mtr, 20mtr, or as per requirement.
Thickness As Per Specified Class.
Surface/Design Anti-Skid Fabric Impression or Corrugated Top