Neoprene

Neoprene

(Polychloroprene)

One of the first synthetic rubbers developed in the search for oil resistant rubber. Widely used due to its combination of useful properties and comparatively low price.

Properties

  • resistant to a wide range of hostile environments
  • resistant to oils and chemicals
  • weather and water resistant
  • can withstand temperatures from -30°C to 95°C
  • easy to process and compound, offering cost benefits
  • flame retardant
  • can be produced in any colour required

Limitations

  • unsuitable for applications requiring contact with fuels
  • tendency to tear once there is initial damage
  • some Neoprenes may crystallise during storage or use causing temporary stiffening (increase in modulus/hardness). If parts are deformed during crystallisation, they may take on a set. However, crystallisation is a readily reversible phenomenon and can be removed by warming over 80°C. It can be prevented by the use of special grades.

Typical Applications

  • most general mechanical applications without contact with fuel
  • particularly useful in marine environments due to good ozone resistance.

* Neoprene is a registered trade mark of Du Pont.

Member Testimonials

ONGC – Oil and Natural Gas Corporation Limited

"ONGC - Oil and Natural Gas Corporation Limited" - Our complex drilling application where Shaft was eccentric and application was robust & muddy. Replacement was never easy. Mech Spares designed Oil seals resolved difficulty. This gave a complete joy to my maintenance team.
2014-06-08T07:48:57+00:00
“ONGC – Oil and Natural Gas Corporation Limited” – Our complex drilling application where Shaft was eccentric and application was robust & muddy. Replacement was never easy. Mech Spares designed Oil seals resolved difficulty. This gave a complete joy to my maintenance team.

Kuwait National Petroleum Company

"Mr Mohammed Al Duaigy" of (Kuwait National Petroleum Company) : We tried several diaphragms from renown worldwide Rubber manufacturing companies. We found Mech Spares technical know how and product to be of great durability and lasted 3 times more then anticipated. They have accurate understanding of there products.
2014-06-08T07:49:23+00:00
“Mr Mohammed Al Duaigy” of (Kuwait National Petroleum Company) : We tried several diaphragms from renown worldwide Rubber manufacturing companies. We found Mech Spares technical know how and product to be of great durability and lasted 3 times more then anticipated. They have accurate understanding of there products.

McCafferty BM Design Ltd, KENT United Kingdom

"McCafferty BM Design Ltd, KENT United Kingdom" - Most of the O rings manufacturing company suggested to use larger diameter and expensive elastomers. We learnt with Mech Spares that elastomer being weaker compare to metal and alloys and needs appropriate back up for high pressure or high vacuum applications. Further not necessary the most expensive elastomer is the best for all applications. We trust Mr Nilesh chodhari completely for all our O rings designing applications.
2014-06-08T07:50:26+00:00
“McCafferty BM Design Ltd, KENT United Kingdom” – Most of the O rings manufacturing company suggested to use larger diameter and expensive elastomers. We learnt with Mech Spares that elastomer being weaker compare to metal and alloys and needs appropriate back up for high pressure or high vacuum applications. Further not necessary the most expensive View Full →

Bhabha Atomic Research Centre ( BARC )

"Dr. A. Singh" of BARC: The electric Insulation mat manufactured by MECH SPARES as per IS 15624 tested at ERTL and found to withstand 40 Kv and still didn't tear. We have been using since 5 years and still didn't generate any fatigue. They arranged bulk delivery in short period.
2014-06-08T07:16:20+00:00
“Dr. A. Singh” of BARC: The electric Insulation mat manufactured by MECH SPARES as per IS 15624 tested at ERTL and found to withstand 40 Kv and still didn’t tear. We have been using since 5 years and still didn’t generate any fatigue. They arranged bulk delivery in short period.

Tata Steel

"Tata Steel" - One of our old machines started making loud noise and disturbed the entire village. We were compelled to stop the machines which lead to huge production loss. With the help of Mech Spares designed bellows in two part we could retain the lubrication and eliminate the noise.
2014-06-08T07:17:16+00:00
“Tata Steel” – One of our old machines started making loud noise and disturbed the entire village. We were compelled to stop the machines which lead to huge production loss. With the help of Mech Spares designed bellows in two part we could retain the lubrication and eliminate the noise.
View O Ring Reference Chart