Other Mechanical Properties

Other Mechanical Properties

Additional mechanical requirements should be specified only where necessary. They can be specified simply by description e.g. “good tear resistance required” or quantified by the use of a defined test method (such as ASTM or BS test methods) giving maximum or minimum values as appropriate. These values may be obtained by calculation based on the actual requirements of the application, by comparison with known values for similar applications or materials, or by testing a material which has been proved satisfactory by trial or experiment.

Where requirements are considerably more complex than the scope of this publication, the ASTM or BS framework for specifying rubber materials can be consulted. Materials may also be selected from the BS range of standard and special application specifications, some of which are listed below.

If the properties required of the rubber are difficult to determine, the production of a prototype mould should be considered. A variety of rubber compounds can then be moulded and parts tested for suitability in the actual application. Once a material has been proved suitable, it can be tested and its properties appropriately defined.

Member Testimonials

ONGC – Oil and Natural Gas Corporation Limited

"ONGC - Oil and Natural Gas Corporation Limited" - Our complex drilling application where Shaft was eccentric and application was robust & muddy. Replacement was never easy. Mech Spares designed Oil seals resolved difficulty. This gave a complete joy to my maintenance team.
2014-06-08T07:48:57+00:00
“ONGC – Oil and Natural Gas Corporation Limited” – Our complex drilling application where Shaft was eccentric and application was robust & muddy. Replacement was never easy. Mech Spares designed Oil seals resolved difficulty. This gave a complete joy to my maintenance team.

Kuwait National Petroleum Company

"Mr Mohammed Al Duaigy" of (Kuwait National Petroleum Company) : We tried several diaphragms from renown worldwide Rubber manufacturing companies. We found Mech Spares technical know how and product to be of great durability and lasted 3 times more then anticipated. They have accurate understanding of there products.
2014-06-08T07:49:23+00:00
“Mr Mohammed Al Duaigy” of (Kuwait National Petroleum Company) : We tried several diaphragms from renown worldwide Rubber manufacturing companies. We found Mech Spares technical know how and product to be of great durability and lasted 3 times more then anticipated. They have accurate understanding of there products.

McCafferty BM Design Ltd, KENT United Kingdom

"McCafferty BM Design Ltd, KENT United Kingdom" - Most of the O rings manufacturing company suggested to use larger diameter and expensive elastomers. We learnt with Mech Spares that elastomer being weaker compare to metal and alloys and needs appropriate back up for high pressure or high vacuum applications. Further not necessary the most expensive elastomer is the best for all applications. We trust Mr Nilesh chodhari completely for all our O rings designing applications.
2014-06-08T07:50:26+00:00
“McCafferty BM Design Ltd, KENT United Kingdom” – Most of the O rings manufacturing company suggested to use larger diameter and expensive elastomers. We learnt with Mech Spares that elastomer being weaker compare to metal and alloys and needs appropriate back up for high pressure or high vacuum applications. Further not necessary the most expensive View Full →

Bhabha Atomic Research Centre ( BARC )

"Dr. A. Singh" of BARC: The electric Insulation mat manufactured by MECH SPARES as per IS 15624 tested at ERTL and found to withstand 40 Kv and still didn't tear. We have been using since 5 years and still didn't generate any fatigue. They arranged bulk delivery in short period.
2014-06-08T07:16:20+00:00
“Dr. A. Singh” of BARC: The electric Insulation mat manufactured by MECH SPARES as per IS 15624 tested at ERTL and found to withstand 40 Kv and still didn’t tear. We have been using since 5 years and still didn’t generate any fatigue. They arranged bulk delivery in short period.

Tata Steel

"Tata Steel" - One of our old machines started making loud noise and disturbed the entire village. We were compelled to stop the machines which lead to huge production loss. With the help of Mech Spares designed bellows in two part we could retain the lubrication and eliminate the noise.
2014-06-08T07:17:16+00:00
“Tata Steel” – One of our old machines started making loud noise and disturbed the entire village. We were compelled to stop the machines which lead to huge production loss. With the help of Mech Spares designed bellows in two part we could retain the lubrication and eliminate the noise.
View O Ring Reference Chart