MECH 15 Piston Seal
| ITEM | ITEM NO. | MECH CODE | DIMENSION |
| PISTON SEAL | MECH15 | MECH15 025-0S14 | 25 X 14 X 4,2 |
| PISTON SEAL | MECH15 | MECH15 032-021 | 32 X 21 X 4,2 |
| PISTON SEAL | MECH15 | MECH15 040-029 | 40 X 29 X 4,2 |
| PISTON SEAL | MECH15 | MECH15 050-039 | 50 X 39 X 4,2 |
| PISTON SEAL | MECH15 | MECH15 060-049 | 60 X 49 X 4,2 |
| PISTON SEAL | MECH15 | MECH15 063-052 | 63 X 52 X 4,2 |
| PISTON SEAL | MECH15 | MECH15 070-059 | 70 X 59 X 4,2 |
| PISTON SEAL | MECH15 | MECH15 080-069 | 80 X 69 X 4,2 |
| PISTON SEAL | MECH15 | MECH15 090-074.5 | 90 X 74,5 X 6,3 |
| PISTON SEAL | MECH15 | MECH15 100-084.5 | 100 X 84,5 X 6,3 |
| PISTON SEAL | MECH15 | MECH15 110-094.5 | 110 X 94,5 X 6,3 |
| PISTON SEAL | MECH15 | MECH15 120-104.5 | 120 X 104,5 X 6,3 |
| PISTON SEAL | MECH15 | MECH15 125-109.5 | 125 X 109,5 X 6,3 |
| PISTON SEAL | MECH15 | MECH15 130-114.5 | 130 X 114,5 X 6,3 |
PISTON SEAL
Having 2 parts design , our MECH15 piston seal consists of a sealing ring with 95 shore A PU and a 70 Shore A NBR O-ring.The o-ring is used as a pressure ring.Being used safely in light duty cylinders up to max.250 bar , our double acting MECH15 pistons seals have The advantages of being easily assemblied , occupying small area and economical prices.It is recomended that MECH15 type seals must be used in combination of 2 piston guide rings in long stroke cylinders and of 1 guide ring in short stroke cylinders having lower radial load.
"For your needs out of our standart programme please contact our customer service."
| Operating Conditions | ||
|---|---|---|
| Media | Mineral Oils ( DIN 51524 ) HFA,HFB,HFC Hydraulic Oils | |
| Temperature | -30 °C ile + 100 °C Mineral Oils +5 °C ile +50 °C HFA,HFB -30 °C ile +40 °C HFC |
|
| Operating Pressure | < 250 Bar | |
| Linear Velocity | < 0.5 m/sn | |
| Surface Roughness | ||
|---|---|---|
|
Ra | Rt |
Sliding Surface |
< 0.3 m | < 2 .5 m |
Housing Surface |
< 1.6 m | < 6.3 m |
| Tolerances | ||
|---|---|---|
| Diameter D | Tolerances to be Applied | |
| D < 200 | H9/h9 | |
| Max. Permissible Gap | ||
|---|---|---|
| L | 150 Bar | 250 Bar |
| < 8.1 | 0.5 | 0.35 |
Products
- Rotary & General Sealing
- O Rings
- V Rings
- Hydraulic Rod Seals
- Wiper Seal
- Hydraulic Others
- Pneumatic Seals
- Pneumatic Rod Seals
- Piston Seals
- Rubber Sheets
- Expansion Joints & Bellows
- Fabric Bellows
- Gaskets
- Rubber Plastic & PVC Caps
- Engineering Plastic
- General Products
- Custom Made Rubber
- PTFE Products
- Pu Products
- Diaphragms
Technical Data
Follow Us
© Mech Spares Pvt. Ltd. All rights reserved.
Website Design by EWEBAC